|
2U Power Supply 300W Zippy Emacs P2U-6320P. Input: VOLTAGE: 103 ~ 264 VAC
FREQUENCY: 47~63HZ
INPUT CURRENT: 6A/3A AT 110/220VAC
INRUSH CURRENT: 40/80A AT 110/220VAC Features: l TEMPERATURE RANGE: OPERATING:0℃ --- 40℃ l HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE l DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND l EFFICIENCY: 60% TYPICAL l POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms l OVER LOAD PROTECTION: 130 +/- 20% OVER VOLTAGE PROTECTION: +5V à 5.5V ~ 7V, 3.3V à 4.0 ~ 4.5V l SHORT CIRCUIT PROTECTION: +5V, -5V, +12V, -12V, +3.3V l EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A l SAFETY: UL 1950, CSA 22.2 NO/ 950, TÜV IEC 950 l REMOTE ON / OFF CONTROL THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE / ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STANDBY), AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE, AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE. l 3.3V / 5V REMOTE SENSING l COOLING: TWO 60mm DC FANS l DIMENSION: 200 (D) x 100 (W) x 70 (H) mm l MEET IEC-1000-3-2 CLASS D l OVERHEAT PROTECTION : SHUT OFF Dimensions: 200x100x70(mm) Connectors: 1 x 20 pin, 1 x 12vP4, 6 x Molex HD, 2 x Floppy Drive Cable Length : ATX 430mm / Peripherals 600mm Inc 2 x Mounting brackets
Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
5V | 3 | 35 | ± 5% | ± 1% | 80mV |
12V | 0.5 | 16 | ± 8% | ± 1% | 120mV |
-5V | 0.0 | 0.5 | ± 5% | ± 1% | 120mV |
-12V | 0.1 | 1 | ±10% | ± 1% | 150mV |
3.3V | 1 | 20 | ± 5% | ± 1% | 70mV |
+5VSB | 0 | 1.2 | ± 5% | ± 1% | 50mV |
| | | | | |
| | | | | |
| | | | | |
REMARKS: (1) TOTAL CURRENT OF 5V & 3.3V NOT EXCEED 35A (2) TOTAL POWER OUTPUT NOT EXCEED 320W
|
