Introduction
FSP400-50WCB is a standard 2U form factor switching power supply. Replaces FSP400-702UJ. DRAWING:- 9PA400MP03 The power supply comes to offer the total power capacity up to 400 Watts, which makes it to be perfectly used in an industrial environment. In addition, the power supply is ideally the best choice for IPC controller, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
Feature
- Internal 7 cm fan with IEC 62368 standard vents opening
- Low Ripple & Noise
- Support OCP and OVP circuit protection
- Short circuit protection on all outputs
- Resettable power shut down
- 100% Hi-pot tested
- MTBF:100K hours at 25°C
- 100% burn-in under high ambient temperature (50°C)
OUTPUT VOLTAGE | OUTPUT CURRENT | REGULATION | OUTPUT |
MIN ( A ) | MAX ( A ) | LOAD | LINE | RIPPLE & NOISE
MAX. [ P-P ] |
+5V | 0.0 | 16 | ±5% | ±1% | 60mV |
+12V | 0.05 | 33 | ±5% | ±1% | 120mV |
| | | | | |
-12V | 0.0 | 0.3 | ±5% | ±1% | 120mV |
+3.3V | 0.0 | 14 | ±5% | ±1% | 60mV |
+5VSB | 0.0 | 3.0 | ±5% | ±1% | 60mV |
The combined output power +5V&+3.3V shall not exceed 90W.
The total power shall not exceed 400W.
|
