|
FSP350-60PFB is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 350 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
Wattage 350W Dimension 140mm (L) × 150 mm (W) × 86mm (H) Product Highlight Efficiency Level 80 Plus PMBus For standard, advanced workstation, server and industrial power system. General Specification Voltage Regulation +3.3V, +12V, +5V, +5SB: ±5% -12V: ±10% Input Electrical Specification Input Frequency 47 ~ 63 Hz Input Current 115V@ 6.0 Amps-rms maximum 230V@ 3.0 Amps-rms maximum Output Specification Hold-up time 115V/60Hz 17mSec. Minimum@100% Load, 230V/50Hz 17mSec. Minimum@100% Load Ouput Voltage Regulation +3.3Vdc output : +3.5 Vdc minimum, + 4.5Vdc maximum +5Vdc output : +5.5 Vdc minimum, + 6.82Vdc maximum +12Vdc output : +13.4 Vdc minimum, + 15.6Vdc maximum Ripple & Noise 115V-rms/230V-rms 5V 20ms Maximum 115V-rms/230V-rms 12V 20ms Maximum Environmental Requirement Temperature Range Operating : 0 to +50℃ Storage :-20 to +80℃ Humidity Operating : 85% to % RH, Non-condensing Storage : 95% to % RH, Non-condensing MBTF The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nominal AC inout voltage Safety CE,FCC,TUV,UL/cUL,CCC Output Voltage and Current Rating +3.3V +5V +12V1 +12V2 -12V +5Vsb Ripple-Noise(R-P) mV 50mV 50mV 120mV 120mV 120mV 50mV Regulation Load % ±5% ±5% ±5% ±5% ±10% ±5% Output Max.(A) 20A 20A 16A 16A 0.5A 2.5A Output Min.(A) 0.3A 0.5A 1A 1A 0A 0A Notes 5V, 3.3V, 12V, -12V Will gave the regulation to 10% when all load take off. The +3.3V, +5V total output shall not exceed 150 watts. The +3.3V, +5V and +12V1 and 12V2 total output shall not exceed 335 watts. The total output shall not exceed 350 watts
|
