PSA065-120 12vDC 3.75A 65W Open Frame ITE power supply Phihong. Length: 101.6mm (4.0in), Height: 30.6mm (1.2in), Width: 50.8mm (2.0in). Weight: 160g (5.64oz)
PSA065-120 is a 65 watt, open frame AC/DC power supply in an industry standard 2" x 4" format. This chassis mount power supply has a 90-264 AC volt wide-range input. It has operating temperature range of 0 - 50 °C and up to 80% efficiency. The PSA065-120-R is RoHS compliant
Input:
AC Input Voltage Rating:
100 to 240V AC
AC Input Voltage Range: 90 to 264V AC
AC Input Frequency: 47 to 63Hz
Input Current: 1.5A at maximum load and 115V AC, 0.75A at maximum load and 230V AC
Leakage Current: 100uA maximum at 264V AC
Inrush Current: 30A for 1150V AC at maximum load, 60A for 230V AC at maximum load, (Cold start at ambient 25°C)
Hold-up Time: 10mS typical at maximum load and 115V AC
Output:
Efficiency: 80% minimum at maximum load and 115V AC
Over-Voltage Protection: +48V DC at +72V DC maximum
Over-Current Protection: Auto-restart
Input Protection: Fuse in line and neutralEnvironmental:
Temperature: Operation 0 to 50°C, Non-operation -25 to +85°C
Humidity; Operation 5 to 95% non-condensing
Emissions: FCC Class B, EN55022 Class B
Immunity: EN55024 1998, EN61000-4-2 Level 3, EN61000-4-3 Level 2, EN61000-4-4 Level 3, EN61000-4-5 Level 3
EN61000-4-6 Level 2, EN61000-4-11, EN61000-3-2 Harmonic Class A, EN61000-3-3 Flicker
General:
Insulation Resistance: 10M Ohm minimum, 500V DC
Dielectric Withstand (Hi-pot) Test: Input to Ground: 1600V AC for 3 seconds, 10mA
Input to Output: 4200V AC for 3 seconds, 10mA
Switching Frequency: 50K Hz typical
MTBF (Full load and 110V AC, 25°C): >100K Hrs
Input Connector: Molex 09-51-4034 housing with Molex 08-50-0106 pins
DC Output Connector: Molex 26-03-4041 housing with Molex 08-50-0189 pins.
