|
THIS PART IS NO LONGER AVAILABLE AND IS DISCONTINUED. PLEASE CONTACT US. ALTERNATIVE PART IS FSP500-60PFG. FSP400-60PFG (PFC) ATX P4 Quiet Computer Power Supply. A high quality and high power coefficient PFC power supply. Excellent for high quality users and overclockers! A highly filtered and quiet 400Watts, six output unit with remote on/off, built-in EMI filter, and UL, CSA, TUV, CB, CE, NEMKO approvals. Designed for Pentium 4 motherboards, also downward compatible with standard ATX motherboards. 80 Plus Bronze. Replacement for FSP400-60PFN, ATX300GTF etc
Features:
• High efficiency. • Internal 12 VDC ball bearing fan included with Noise Killer. • Low noise and ripple. • Complies with FCC part 15 subpart J class B 115 VAC operation and CISPR 22 Class B 230 VAC operation. • Output over voltage protection. • Short circuit protection on all outputs. • MTBF above 50,000 hrs. at 25oC. 100% Hi-pot & ATE tested. • Short circuit protection on all outputs. • Resettable power shut down. • 100% burn-in under high ambient temp. (50*C). • Approved by UL 1950, CSA C22.2 No. 234 Level 3, IEC 950, TUV EN 60950 or VDE 0805, NEMKO EN60950 and RoHS.
Specifications:
INPUT (Voltage): | 95 ~ 264 VAC Universal Input |
Frequency: | 47Hz ~ 63Hz |
Input Current: | 8A (RMS) @ 115VAC; 4A (RMS) @ 230VAC |
Inrush Current: | 80A Max. for 115 VAC; 120A Max for 230VAC |
DC output: | +3.3V: 28A; +5V: 40A; +12V: 15A; -12V: 0.8A; -5V: 0.3A; +5VSB: 2A |
Maximum power: | 400W |
Temperature Range: | Operating, 0oC to +40°C. Storage, -20oC to +65°C |
Temp. Coefficient: | 0.01%/oC |
Transient Response: | Output voltage returns in less than 1mS max. at a 25% load change |
Hold-up Time: | 17.6mS min. at full & nominal input voltage |
Dielectric Withstand: | Input to frame ground 1800 VAC for 1 second |
Humidity: | 95% RH |
Efficiency: | 65% at DC-24 Input, at full load |
Power Good Signal: | Power on delay time 100mS to 500mS, off delay 1mS min |
Overload Protection: | 150% maximum |
Dimensions (mm): | 86 (H) x 150 (W) x 140 (L) |
DC Output Connectors: | Three Hard Drive IDE connectors, one floppy connector, one 12V P4 power connector, two Sata connectors, one P4 12V Aux power connector, one 20 + 4 way MB connector |
DC Lead Length: | 50cms from PSU to 20+4 way ATX connector |
|
