|
FSP500-60MRB(S) FSP maximum continuous total DC output power should net exceed 500W. Maximum continuous combined load on +3.3V and +5V outputs shall not exceed 130W. Maximum combined current for the 12V outputs shall be 40A. When peak load of +5Vsb is 2.5A, the main power should be turn on. IEC62368-1, IEC60950-1. Part number:- 9PR5000701. Input Spec: Input Voltage : 90-264vAC Input Frequency: 47-65 Hz Output Spec: Ripple and Noise: +3.3v, +5v, +5VSB: 50mV p-p, +12v : 120mV p-p, -5v, -12v: 200mV p-p Hold up time: 16mS OVP; +3.3v : 3.9v - 4.5v, +5v : 5.7v - 6.5v, +12v : 13.3v - 14.5v OTP: Primary and Secondary Protection with auto recovery OCP : +3.3v, +5v : 110 - 150%, +12v1, 2, 3 : Peak current minimum; 20.5A maximum Remote On/Off: On = PSON: 0V - 1.0V, Off = PSON : 2.0V - 5.25V Current share ; 2 supplies to share within +/- 5% I2C-Bus EEPROM MTBF : 100KHrs per Bellcore SR-332 at 25C Efficiency ; Min 80% at Full Load OPP Temp : 0-50C Safety Approvals: CB, CE, FCC, TUV, cUL Outputs: +3.3vDC 0 - 20A +5vDC 0 - 20A +12vDC 1 - 40A -5vDC 0 - 0.3A (Optional) -12vDC 0 - 0.5A +5VSB 0 - 3A Size: 190mmL x 150mmW x 84mmH Connectors :- 1 x 24 way, 1 x 4 way floppy, 2 x 4 way Molex, 2 x SATA, 1 x 5 way Fan, 1 x 12V P4, 2 x 8 Pin PCIE 12v.
|
