|
FSP350-70PFL(SK) is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 350 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide. To Cable Drawing:- 9PA350CM01
Wattage | 350W |
Dimension | 140mm (L) × 150 mm (W) × 86mm (H) |
Product Highlight | Efficiency Level | 80 Plus Bronze |
| Altitude | 2000M |
| PMBus | For standard, advanced workstation, server and industrial power system. |
General Specification | Effciency | 85% 230VAC |
| Voltage Regulation | +3.3V, +12V, +5V, +5SB: ±5%
-12V, -5V: ±10% |
| PWOK Delay Time | 500ms > PWOK > 100ms |
Input Electrical Specification | Input Frequency | 47 ~ 63 Hz |
| Input Current | 115V@ 7.0 Amps-rms maximum
230V@ 3.5 Amps-rms maximum |
Output Specification | Hold-up time | 115V/60Hz 15mSec. Minimum@100% Load,
230V/50Hz 15mSec. Minimum@100% Load |
| Ouput Voltage Regulation | +3.3Vdc output : +3.7 Vdc minimum, + 4.8Vdc maximum
+5Vdc output : +5.7 Vdc minimum, + 7Vdc maximum
+12Vdc output : +13.3 Vdc minimum, + 16Vdc maximum |
| Ripple & Noise | 115V-rms/230V-rms 5V 20ms Maximum
115V-rms/230V-rms 12V 20ms Maximum |
| Over current protection | 3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
12V2:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p
-5V:100mV p-p |
Environmental Requirement | Temperature Range | Operating : 0 to +50℃
Storage :-20 to +80℃ |
| Humidity | Operating : 85% to % RH, Non-condensing
Storage : 95% to % RH, Non-condensing |
| MBTF | The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nominal AC inout voltage |
Safety | CE,FCC,TUV,UL/cUL,CCC |
Output Voltage and Current Rating
| +3.3V | +5V | +12V1 | +12V2 | -12V | -5V | +5Vsb |
Ripple-Noise(R-P) mV | 50mV | 50mV | 120mV | 120mV | 120mV | 100mV | 50mV |
Regulation Load % | ±5% | ±5% | ±5% | ±5% | ±10% | ±10% | ±5% |
Output Max.(A) | 21A | 16A | 17A | 17A | 0.5A | 0.3A | 3A |
Output Min.(A) | 0.5A | 0.5A | 0.5A | 0.5A | 0A | 0A | 0.1A |
Notes
- 5V, 3.3V, 12V, -12V Will gave the regulation to 10% when all load take off.
- The +3.3V, +5V total output shall not exceed 105 watts.
- The total output shall not exceed 350 watts.
- -5V fitted, 5vsb peak<=10ms.
Output Cables:- 1 x 20 + 4 way connector, 3 x 4 way Molex connector, I x 4 way 12V P4 connector, 2 x SATA connectors, 1 x 4 way Floppy Connector.
|
