|
Emacs Zippy P2H-5400V 2U 400 watt Power Supply, fitted with cable assembly B00P2H040V001 Features :
* TEMPERATURE RANGE：OPERATING 0℃～40℃
* HOLD UP TIME：16mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1800 VAC FOR 1 SECOND INPUT TO
FRAME GROUND 1800 VAC FOR 1 SECOND
* EFFICIENCY：83% TYPICAL AT 115VAC , FULL LOAD
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS
* OVER POWER PROTECTION：110～160% MAX
* OVER VOLTAGE PROTECTION：+5V→5.6V～6.6V +3.3V→3.6V～4.3V +12V→13.2V～15V
* SHORT CIRCUIT PROTECTION：+5V、+12V、+3.3V
* EMI NOISE FILTER : FCC CLASS A, CISPR22 CLASS A
* SAFETY : TO MEET UL, CUL, TUV
* REMOTE ON/OFF CONTROL THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN
COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE
(EXCLUDE +5V STAND BY). AS LOGIC LEVEL IS LOW，OUTPUTS VOLTAGE WERE
ENABLE， AS LOGIC LEVEL IS HIGH，OUTPUTS VOLTAGE WERE DISABLE.
* 3.3V & 5V REMOTE SENSING
* COOLING: ONE 40mm DC FANS
* MEET IEC-1000-3-2 CLASS D Outputs :
Output Voltage | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
+5V | 1 | 22 | ±5% | ±1% | 70mV |
+12V | 1 | 32 | ±5% | ±1% | 120mV |
-12V | 0.1 | 0.8 | ±10% | ±1% | 120mV |
+3.3V | 1 | 22 | ±5% | ±1% | 70mV |
+5VSB | 0.1 | 3.5 | ±5% | ±1% | 70mV |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
Dimension:
215 x 100 x 70(mm)
8.46 x 3.94 x 2.76(inch)
|
