R2A-500D1V2 Redundant 2U 500W EPS Zippy 80 plus
AC Input:
- Input voltage: 100 ~ 240V (+-/10%) [ HOT-SWAP SOLUTION]
- Frequency: 50/60Hz.
- Power Factor Correction.
Features:
DIMENSION:D265 X W101 X H84mm / D10.43 x W3.98 x H3.3 (inches)
> COOLING:By forced air 2x40mm Fan (Each module)
> 2U IPC Redundant Power Supply
> Hot-swappable/Hot-pluggable, High-Density Redundant power supply
> Full Range AC Input.
> High Efficiency:80% Typical at full load
> Hold-Up Time: 16ms at maximum load & normal input voltage.
> OVER VOLTAGE PROTECTION.
> SHORT CIRCUIT PROTECTION.
> OVER POWER PROTECTION.
> ENVIRONMENT TEMPERATURE
Operation Temperature: 0℃to +45℃
Cooling: BY BALL BEARING DC FAN.
Storage Temperature:-20℃ to 70℃
Humidity: 5% to 95%, non-condensing
> RELIABILITY Mean Time Between Failure(MTBF)
Using MIL - HDBK -217F the calculated MTBF 100,000 hours
| Output Voltage |
+5V DC |
+12V DC |
+3.3V DC |
-12V DC |
+5VSB |
| Output Current(Max) |
32A |
40A |
25A |
1A |
3.5A |
| Output Current(Min.) |
1A |
3A |
1A |
0A |
0.1A |
| Ripple/Noise Max.(P-P): |
50mv |
70mv |
50mv |
70mv |
50mV |
| Line Regulation: |
±1﹪ |
±1﹪ |
±1﹪ |
±1﹪ |
±1﹪ |
| Load Regulation: |
±5﹪ |
±5﹪ |
±5﹪ |
±5﹪ |
±5﹪ |
|
2+4 Pin |
P4 MB |
Peripheral |
FDD |
8-Pin |
SATA |
6-Pin |
|
X 1 |
X 1 |
X 9 |
X 1 |
X 1 |
X 4 |
X 1 |
