| Protocol/Standards |
HomePlug 1.0 specification, IEEE 802.3 10/100 Ethernet (100Mbps) and IEEE 802.3u Fast Ethernet Compliant
10/100 Mbps AutoMDI/MDIx Support
85Mbps HomePlug 1.0 compatible |
| Modulation Support |
OFDM 256/64/16, DQPSK, DBPSK and ROBO Modulation Scheme |
| Frequency Band |
4.3 Mhz to 20.9 Mhz band |
| Quality of Service |
Forward Error Correction (FEC) support
Channel Adaptation ensures that signal integrity is maintained even under harsh noise environment
CSMA/CA with prioritization and ARQ for reliable delivery of Ethernet packets via Packet Encapsulation
Four Level prioritized random access method
Segment bursting and contention-free access ensures high throughput while maintaining low latency response and jitter performance |
| Security Support |
56 bit DES Encryption with key management for secure powerline communications (Utilise Windows 98SE, 2000, ME, XP, Vista, Win7 to enable encryption) |
| Hardware |
Intellon INT5500 Integrated Single-chip Powerline Network Transceiver
Intellon INT1200 Analog Front End IC |
| Platform Support |
OS Independent with TCP/IP protocol installed. (Windows, Mac, Linux, Unix... Anything!)
Encryption passwords are set using a supplied utility which is only available for Windows. Encryption is normally required only on installations with a shared mains supply. |
| Power Supply |
Input Voltage : 100Vac - 240Vac
Input Current : 0.06A max
Frequency : 50/60Hz |
| LED Indicators |
1 x Power LED (PWR)
1 x Powerline Link/ACT Status LED (PL-LKACT)
3 x Ethernet Link/ACT Status LED (ETH-LKACT) |
| Temperature |
Operating : 0° to 40° C
32° to 113° F
Non-Operating :-25° to 70° C
-13° to 158° F |
| Humidity |
Operating : 30% to 90% Relative Humidity (Non-Condensing)
Non-Operating : 30% to 95% Relative Humidity (Non-Condensing) |
