|
PUP30-31-Q3-S is no longer available, but we will supply an alternative desktop adapter with outputs to replace original part. This will replace it 100% and fitted with the five pin DIN connector. 30 Watt Desktop Power Supply Adapter Protek Power. The PUP30 series of AC/DC switching power supplies are for 25 to 30 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC 320 inlet to mate with interchangeable cord for world-wide use. All models meet CISPR 22 and FCC class B emission limits, and comply with UL, CSA, IEC and CE requirements.
Features: 15 standard desktop models
Single, dual or triple outputs
Optional output connectors
Optional on/off switch
100﹪ burn-in
Wide input range 85 to 264 VAC
Input surge current protection
Overvol tage protection
Overcurrent protection
Compliant with RoHS requirements
Safety Standard Approvals:
UL 60950-1, CSA C22.2 NO. 60950-1 File No. E137410
TÜV EN60950-1 Certificate No. S 50098383
INPUT SPECIFICATIONS |
Input voltage: | 85 to 264 VAC |
Input frequency: | 47 to 63 Hz |
Input current: | 0.80A（ rms） for 115VAC 0.50A（ rms） for 230VAC |
OUTPUT SPECIFICATIONS |
Output voltage/current | 5vDC 3 Amps, +12vDC 0.8Amps, -12vDC 0.8Amps |
Output power range | 30 watts maximum |
Ripple and noise | 1﹪peak to peak maximum |
Overvoltage protection | Provided on output #1 only; set at 112-132﹪of its nominal output voltage |
Overcurrent protection | All outputs protected to short circuit conditions |
Temperature coefficient | All outputs ±0.04/°C maximum |
Transient response | Maximum excursion of 4﹪or better on all models, recovering to 1﹪of final value within 500us after a 25﹪ step load change |
|
